Metadata-Version: 1.2
Name: black
Version: 18.3a1
Summary: The uncompromising code formatter.
Home-page: https://github.com/ambv/black
Author: Łukasz Langa
Author-email: lukasz@langa.pl
License: MIT
Description: black
        =====
        
        |Build Status|
        
            Any color you like.
        
        *Black* is the uncompromising Python code formatter. By using it, you
        agree to cease control over minutiae of hand-formatting. In return,
        *Black* gives you speed, determinism, and freedom from ``pycodestyle``
        nagging about formatting. You will save time and mental energy for more
        important matters.
        
        Blackened code looks the same regardless of the project you’re reading.
        Formatting becomes transparent after a while and you can focus on the
        content instead.
        
        *Black* makes code review faster by producing the smallest diffs
        possible.
        
        NOTE: This is an early pre-release
        ----------------------------------
        
        *Black* can already successfully format itself and the standard library.
        It also sports a decent test suite. However, it is still very new.
        Things will probably be wonky for a while. This is made explicit by the
        “Alpha” trove classifier, as well as by the “a” in the version number.
        What this means for you is that **until the formatter becomes stable,
        you should expect some formatting to change in the future**.
        
        Also, as a temporary safety measure, *Black* will check that the
        reformatted code still produces a valid AST that is equivalent to the
        original. This slows it down. If you’re feeling confident, use
        ``--fast``.
        
        Usage
        -----
        
        *Black* can be installed by running ``pip install black``.
        
        ::
        
            black [OPTIONS] [SRC]...
        
            Options:
              -l, --line-length INTEGER   Where to wrap around.  [default: 88]
              --check                     Don't write back the files, just return the
                                          status.  Return code 0 means nothing changed.
                                          Return code 1 means some files were reformatted.
                                          Return code 123 means there was an internal
                                          error.
              --fast / --safe             If --fast given, skip temporary sanity checks.
                                          [default: --safe]
              --version                   Show the version and exit.
              --help                      Show this message and exit.
        
        The philosophy behind *Black*
        -----------------------------
        
        *Black* reformats entire files in place. It is not configurable. It
        doesn’t take previous formatting into account. It doesn’t reformat
        blocks that start with ``# fmt: off`` and end with ``# fmt: on``. It
        also recognizes `YAPF <https://github.com/google/yapf>`__\ ’s block
        comments to the same effect, as a courtesy for straddling code.
        
        How *Black* formats files
        ~~~~~~~~~~~~~~~~~~~~~~~~~
        
        *Black* ignores previous formatting and applies uniform horizontal and
        vertical whitespace to your code. The rules for horizontal whitespace
        are pretty obvious and can be summarized as: do whatever makes
        ``pycodestyle`` happy.
        
        As for vertical whitespace, *Black* tries to render one full expression
        or simple statement per line. If this fits the allotted line length,
        great.
        
        .. code:: py3
        
            # in:
            l = [1,
                 2,
                 3,
            ]
        
            # out:
            l = [1, 2, 3]
        
        If not, *Black* will look at the contents of the first outer matching
        brackets and put that in a separate indented line.
        
        .. code:: py3
        
            # in:
            l = [[n for n in list_bosses()], [n for n in list_employees()]]
        
            # out:
            l = [
                [n for n in list_bosses()], [n for n in list_employees()]
            ]
        
        If that still doesn’t fit the bill, it will decompose the internal
        expression further using the same rule, indenting matching brackets
        every time. If the contents of the matching brackets pair are
        comma-separated (like an argument list, or a dict literal, and so on)
        then *Black* will first try to keep them on the same line with the
        matching brackets. If that doesn’t work, it will put all of them in
        separate lines.
        
        .. code:: py3
        
            # in:
            def very_important_function(template: str, *variables, *, file: os.PathLike, debug: bool = False):
                """Applies `variables` to the `template` and writes to `file`."""
                with open(file, 'w') as f:
                    ...
        
            # out:
            def very_important_function(
                template: str,
                *variables,
                *,
                file: os.PathLike,
                debug: bool = False,
            ):
                """Applies `variables` to the `template` and writes to `file`."""
                with open(file, 'w') as f:
                    ...
        
        You might have noticed that closing brackets are always dedented and
        that a trailing comma is always added. Such formatting produces smaller
        diffs; when you add or remove an element, it’s always just one line.
        Also, having the closing bracket dedented provides a clear delimiter
        between two distinct sections of the code that otherwise share the same
        indentation level (like the arguments list and the docstring in the
        example above).
        
        Unnecessary trailing commas are removed if an expression fits in one
        line. This makes it 1% more likely that your line won’t exceed the
        allotted line length limit.
        
        *Black* avoids spurious vertical whitespace. This is in the spirit of
        PEP 8 which says that in-function vertical whitespace should only be
        used sparingly. One exception is control flow statements: *Black* will
        always emit an extra empty line after ``return``, ``raise``, ``break``,
        ``continue``, and ``yield``. This is to make changes in control flow
        more prominent to readers of your code.
        
        That’s it. The rest of the whitespace formatting rules follow PEP 8 and
        are designed to keep ``pycodestyle`` quiet.
        
        Line length
        ~~~~~~~~~~~
        
        You probably noticed the peculiar default line length. *Black* defaults
        to 88 characters per line, which happens to be 10% over 80. This number
        was found to produce significantly shorter files than sticking with 80
        (the most popular), or even 79 (used by the standard library). In
        general, `90-ish seems like the wise
        choice <https://youtu.be/wf-BqAjZb8M?t=260>`__.
        
        If you’re paid by the line of code you write, you can pass
        ``--line-length`` with a lower number. *Black* will try to respect that.
        However, sometimes it won’t be able to without breaking other rules. In
        those rare cases, auto-formatted code will exceed your allotted limit.
        
        You can also increase it, but remember that people with sight
        disabilities find it harder to work with line lengths exceeding 100
        characters. It also adversely affects side-by-side diff review on
        typical screen resolutions. Long lines also make it harder to present
        code neatly in documentation or talk slides.
        
        If you’re using Flake8, you can bump ``max-line-length`` to 88 and
        forget about it. Alternatively, use
        `Bugbear <https://github.com/PyCQA/flake8-bugbear>`__\ ’s B950 warning
        instead of E501 and keep the max line length at 80 which you are
        probably already using. You’d do it like this:
        
        .. code:: ini
        
            [flake8]
            max-line-length = 80
            ...
            select = C,E,F,W,B,B950
            ignore = E501
        
        You’ll find *Black*\ ’s own .flake8 config file is configured like this.
        If you’re curious about the reasoning behind B950, Bugbear’s
        documentation explains it. The tl;dr is “it’s like highway speed limits,
        we won’t bother you if you overdo it by a few km/h”.
        
        Editor integration
        ~~~~~~~~~~~~~~~~~~
        
        There is currently no integration with any text editors. Vim and
        Atom/Nuclide integration is planned by the author, others will require
        external contributions.
        
        Patches welcome! ✨ 🍰 ✨
        
        Testimonials
        ------------
        
        **Dusty Phillips**,
        `writer <https://smile.amazon.com/s/ref=nb_sb_noss?url=search-alias%3Daps&field-keywords=dusty+phillips>`__:
        
            Black is opinionated so you don’t have to be.
        
        **Hynek Schlawack**, `creator of ``attrs`` <http://www.attrs.org/>`__,
        core developer of Twisted and CPython:
        
            An auto-formatter that doesn’t suck is all I want for Xmas!
        
        **Carl Meyer**, `Django <https://www.djangoproject.com/>`__ core
        developer:
        
            At least the name is good.
        
        **Kenneth Reitz**, creator of
        ```requests`` <http://python-requests.org/>`__ and
        ```pipenv`` <https://docs.pipenv.org/>`__:
        
            This vastly improves the formatting of our code. Thanks a ton!
        
        Tests
        -----
        
        Just run:
        
        ::
        
            python setup.py test
        
        This tool requires Python 3.6.0+ to run
        ---------------------------------------
        
        But you can reformat Python 2 code with it, too. *Black* is able to
        parse all of the new syntax supported on Python 3.6 but also
        *effectively all* the Python 2 syntax at the same time, as long as
        you’re not using print statements.
        
        By making the code exclusively Python 3.6+, I’m able to focus on the
        quality of the formatting and re-use all the nice features of the new
        releases (check out
        `pathlib <https://docs.python.org/3/library/pathlib.html>`__ or
        f-strings) instead of wasting cycles on Unicode compatibility, and so
        on.
        
        License
        -------
        
        MIT
        
        Contributing
        ------------
        
        In terms of inspiration, *Black* is about as configurable as *gofmt* and
        *rustfmt* are. This is deliberate.
        
        Bug reports and fixes are always welcome! However, before you suggest a
        new feature or configuration knob, ask yourself why you want it. If it
        enables better integration with some workflow, fixes an inconsistency,
        speeds things up, and so on - go for it! On the other hand, if your
        answer is “because I don’t like a particular formatting” then you’re not
        ready to embrace *Black* yet. Such changes are unlikely to get accepted.
        You can still try but prepare to be disappointed.
        
        Change Log
        ----------
        
        18.3a1
        ~~~~~~
        
        -  added ``--check``
        
        -  only put trailing commas in function signatures and calls if it’s
           safe to do so. If the file is Python 3.6+ it’s always safe, otherwise
           only safe if there are no ``*args`` or ``**kwargs`` used in the
           signature or call. (#8)
        
        -  fixed invalid spacing of dots in relative imports (#6, #13)
        
        -  fixed invalid splitting after comma on unpacked variables in
           for-loops (#23)
        
        -  fixed spurious space in parenthesized set expressions (#7)
        
        -  fixed spurious space after opening parentheses and in default
           arguments (#14, #17)
        
        -  fixed spurious space after unary operators when the operand was a
           complex expression (#15)
        
        18.3a0
        ~~~~~~
        
        -  first published version, Happy 🍰 Day 2018!
        
        -  alpha quality
        
        -  date-versioned (see: https://calver.org/)
        
        Authors
        -------
        
        Glued together by `Łukasz Langa <mailto:lukasz@langa.pl>`__.
        
        .. |Build Status| image:: https://travis-ci.org/ambv/black.svg?branch=master
           :target: https://travis-ci.org/ambv/black
        
Keywords: automation formatter yapf autopep8 pyfmt gofmt rustfmt
Platform: UNKNOWN
Classifier: Development Status :: 3 - Alpha
Classifier: Environment :: Console
Classifier: Intended Audience :: Developers
Classifier: License :: OSI Approved :: MIT License
Classifier: Operating System :: OS Independent
Classifier: Programming Language :: Python
Classifier: Programming Language :: Python :: 3.6
Classifier: Programming Language :: Python :: 3 :: Only
Classifier: Topic :: Software Development :: Libraries :: Python Modules
Classifier: Topic :: Software Development :: Quality Assurance
Requires-Python: >=3.6
