#
#
#  BLIS    
#  An object-based framework for developing high-performance BLAS-like
#  libraries.
#
#  Copyright (C) 2014, The University of Texas at Austin
#
#  Redistribution and use in source and binary forms, with or without
#  modification, are permitted provided that the following conditions are
#  met:
#   - Redistributions of source code must retain the above copyright
#     notice, this list of conditions and the following disclaimer.
#   - Redistributions in binary form must reproduce the above copyright
#     notice, this list of conditions and the following disclaimer in the
#     documentation and/or other materials provided with the distribution.
#   - Neither the name of The University of Texas at Austin nor the names
#     of its contributors may be used to endorse or promote products
#     derived from this software without specific prior written permission.
#
#  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
#  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
#  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
#  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
#  HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
#  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
#  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
#  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
#  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
#  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
#
#

#
# Makefile
#
# Field G. Van Zee
# 
# Makefile for standalone BLIS test drivers.
#

#
# --- Makefile PHONY target definitions ----------------------------------------
#

.PHONY: all \
        blis openblas atlas mkl \
        clean cleanx



#
# --- Makefile initialization --------------------------------------------------
#

# Define the name of the common makefile fragment.
COMMON_MK_FILE    := common.mk

# Important locations and directory names.
RELPATH           := ..
CONFIG_DIR        := config



#
# --- Include makefile configuration file --------------------------------------
#

# Construct the path to the makefile configuration file that was generated by
# the configure script.
COMMON_MK_PATH    := $(RELPATH)/$(COMMON_MK_FILE)

# Include the common makefile fragment.
-include $(COMMON_MK_PATH)

# Detect whether we actually got the common makefile fragment. If we didn't,
# then it is likely that the user has not yet generated it (via configure).
ifeq ($(strip $(COMMON_MK_INCLUDED)),yes)
COMMON_MK_PRESENT := yes
else
COMMON_MK_PRESENT := no
endif

# Override the DIST_PATH value obtained from config.mk, since it is relative
# to the build directory.
DIST_PATH         := ..

# Now we have access to CONFIG_NAME, which tells us which sub-directory of the
# config directory to use as our configuration.
CONFIG_PATH       := $(RELPATH)/$(CONFIG_DIR)/$(CONFIG_NAME)



#
# --- BLAS and LAPACK implementations ------------------------------------------
#

# BLIS library and header path. This is simply wherever it was installed.
BLIS_LIB_PATH  := $(INSTALL_PREFIX)/lib
BLIS_INC_PATH  := $(INSTALL_PREFIX)/include/blis

# BLIS library.
BLIS_LIB       := $(BLIS_LIB_PATH)/libblis.a

# BLAS library path(s). This is where the BLAS libraries reside.
BLAS_LIB_PATH  := $(HOME)/flame/lib
#MKL_LIB_PATH   := /opt/apps/intel/13/composer_xe_2013.2.146/mkl/lib/intel64
MKL_LIB_PATH   := $(HOME)/intel/mkl/lib/intel64
ESSL_LIB_PATH  := $(HOME)/path/to/essl/changeme

# OpenBLAS
OPENBLAS_LIB   := $(BLAS_LIB_PATH)/libopenblas.a

# ATLAS
ATLAS_LIB      := $(BLAS_LIB_PATH)/libf77blas.a \
                  $(BLAS_LIB_PATH)/libatlas.a

# MKL
MKL_LIB        := -L$(MKL_LIB_PATH) \
                  -lmkl_intel_lp64 \
                  -lmkl_core \
                  -lmkl_sequential \
                  -lpthread -lm -ldl

# ESSL
# Note: ESSL is named differently for SMP and/or BG
ESSL_TYPE      :=       # This is the 32b library on POWER
#ESSL_TYPE      := 6464  # This is the 64b library on POWER
#ESSL_TYPE      := bg    # This is the 32b single-threaded library on Blue Gene
#ESSL_TYPE      := smpbg # This is the 32b multi-threaded library on Blue Gene
ESSL_LIB       := $(ESSL_LIB_PATH)/libessl$(ESSL_TYPE).a

# Accelerate
MAC_LIB        := -framework Accelerate



#
# --- General build definitions ------------------------------------------------
#

TEST_SRC_PATH  := .
TEST_OBJ_PATH  := .

# Gather all local object files.
TEST_OBJS      := $(patsubst $(TEST_SRC_PATH)/%.c, \
                             $(TEST_OBJ_PATH)/%.o, \
                             $(wildcard $(TEST_SRC_PATH)/*.c))

# Override CFLAGS from make_defs.mk here, if desired.
#CFLAGS         := -g -O2 -march=native

# Add installed and local header paths to CFLAGS
CFLAGS         += -I$(BLIS_INC_PATH) -I$(TEST_SRC_PATH)

LINKER         := $(CC)
LDFLAGS        := #-L/home/00146/field/gnu/gcc-4.8.2/lib64
LDFLAGS        += -lgfortran -lm -lpthread -fopenmp



#
# --- Targets/rules ------------------------------------------------------------
#

# Complete list of possible targets when defining 'all':
#
#   blis openblas atlas mkl mac essl
#
#all: blis openblas atlas mkl
all: blis openblas mkl

blis: test_gemv_blis.x \
      test_ger_blis.x \
      test_hemv_blis.x \
      test_her_blis.x \
      test_her2_blis.x \
      test_trmv_blis.x \
      test_trsv_blis.x \
      \
      test_gemm_blis.x \
      test_hemm_blis.x \
      test_herk_blis.x \
      test_her2k_blis.x \
      test_trmm_blis.x \
      test_trsm_blis.x

openblas: test_gemv_openblas.x \
      test_ger_openblas.x \
      test_hemv_openblas.x \
      test_her_openblas.x \
      test_her2_openblas.x \
      test_trmv_openblas.x \
      test_trsv_openblas.x \
      \
      test_gemm_openblas.x \
      test_hemm_openblas.x \
      test_herk_openblas.x \
      test_her2k_openblas.x \
      test_trmm_openblas.x \
      test_trsm_openblas.x

atlas: test_gemv_atlas.x \
      test_ger_atlas.x \
      test_hemv_atlas.x \
      test_her_atlas.x \
      test_her2_atlas.x \
      test_trmv_atlas.x \
      test_trsv_atlas.x \
      \
      test_gemm_atlas.x \
      test_hemm_atlas.x \
      test_herk_atlas.x \
      test_her2k_atlas.x \
      test_trmm_atlas.x \
      test_trsm_atlas.x

mkl:  test_gemv_mkl.x \
      test_ger_mkl.x \
      test_hemv_mkl.x \
      test_her_mkl.x \
      test_her2_mkl.x \
      test_trmv_mkl.x \
      test_trsv_mkl.x \
      \
      test_gemm_mkl.x \
      test_hemm_mkl.x \
      test_herk_mkl.x \
      test_her2k_mkl.x \
      test_trmm_mkl.x \
      test_trsm_mkl.x

essl: test_gemv_essl.x \
      test_ger_essl.x \
      test_hemv_essl.x \
      test_her_essl.x \
      test_her2_essl.x \
      test_trmv_essl.x \
      test_trsv_essl.x \
      \
      test_gemm_essl.x \
      test_hemm_essl.x \
      test_herk_essl.x \
      test_her2k_essl.x \
      test_trmm_essl.x \
      test_trsm_essl.x

mac:  test_gemv_mac.x \
      test_ger_mac.x \
      test_hemv_mac.x \
      test_her_mac.x \
      test_her2_mac.x \
      test_trmv_mac.x \
      test_trsv_mac.x \
      \
      test_gemm_mac.x \
      test_hemm_mac.x \
      test_herk_mac.x \
      test_her2k_mac.x \
      test_trmm_mac.x \
      test_trsm_mac.x



# --Object file rules --

$(TEST_OBJ_PATH)/%.o: $(TEST_SRC_PATH)/%.c
	$(CC) $(CFLAGS) -c $< -o $@

test_%_openblas.o: test_%.c
	$(CC) $(CFLAGS) -DBLAS=\"openblas\" -c $< -o $@

test_%_atlas.o: test_%.c
	$(CC) $(CFLAGS) -DBLAS=\"atlas\" -c $< -o $@

test_%_mkl.o: test_%.c
	$(CC) $(CFLAGS) -DBLAS=\"mkl\" -c $< -o $@

test_%_essl.o: test_%.c
	$(CC) $(CFLAGS) -DBLAS=\"essl\" -c $< -o $@

test_%_mac.o: test_%.c
	$(CC) $(CFLAGS) -DBLAS=\"mac\" -c $< -o $@

test_%_blis.o: test_%.c
	$(CC) $(CFLAGS) -DBLIS -c $< -o $@


# -- Executable file rules --

# NOTE: For the BLAS test drivers, we place the BLAS libraries before BLIS
# on the link command line in case BLIS was configured with the BLAS
# compatibility layer. This prevents BLIS from inadvertently getting called
# for the BLAS routines we are trying to test with.

test_%_openblas.x: test_%_openblas.o $(BLIS_LIB)
	$(LINKER) $<             $(OPENBLAS_LIB) $(BLIS_LIB) $(LDFLAGS) -o $@

test_%_atlas.x: test_%_atlas.o $(BLIS_LIB)
	$(LINKER) $<             $(ATLAS_LIB)    $(BLIS_LIB) $(LDFLAGS) -o $@

test_%_mkl.x: test_%_mkl.o $(BLIS_LIB)
	$(LINKER) $<             $(MKL_LIB)      $(BLIS_LIB) $(LDFLAGS) -o $@

test_%_essl.x: test_%_essl.o $(BLIS_LIB)
	$(LINKER) $<             $(ESSL_LIB)     $(BLIS_LIB) $(LDFLAGS) -o $@

test_%_mac.x: test_%_mac.o $(BLIS_LIB)
	$(LINKER) $<             $(MAC_LIB)      $(BLIS_LIB) $(LDFLAGS) -o $@

test_%_blis.x: test_%_blis.o $(BLIS_LIB)
	$(LINKER) $<                             $(BLIS_LIB) $(LDFLAGS) -o $@


# -- Clean rules --

clean: cleanx

cleanx:
	- $(RM_F) *.o *.x

